Bambu PLA Matte

Achieve high-quality prints with a smooth, fine-grained finish using Bambu PLA Matte. Ideal for professionals and hobbyists alike, it adds an elegant touch to your 3D project.

• Elegant Matte Finish
  Bambu PLA Matte significantly reduces visible layer lines, offering a smooth, non-glossy appearance that makes your prints stand out.
  Its sleek, refined look is perfect for design projects, architectural models, and display pieces.
• A Palette of Soft, Subtle Colors
  Select from a curated range of elegant, muted colors that beautifully complement the matte finish, ideal for art, fashion designs, and décor projects.
• Easy to Print, High Quality
  Bambu PLA Matte delivers premium results at speeds of up to 270 mm/s (0.4mm nozzle, 0.4mm line width, 0.2mm layer height) without the need for extensive adjustments.
• RFID for Intelligent Printing
  All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
  Load and print! No more tedious setting steps.

Recommended Printing Settings

• Drying Settings (Blast Drying Oven): 50 °C for 8 hours
• Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature: 190 - 230 °C
• Bed Temperature (with Glue): 35 - 45 °C
• Printing Speed: < 300 mm/s

Physical Properties

• Density: 1.31g/cm³
• Vicat Softening Temperature: 63 °C
• Heat Deflection Temperature: 58 °C
• Melting Temperature: 163 °C
• Melt Index: 18.0 ± 3.2 g/10 min

Mechanical Properties

• Tensile Strength: 30 ± 5 MPa
• Breaking Elongation Rate: 14.8 ± 4.2 %
• Bending Modulus: 2360 ± 250 MPa
• Bending Strength: 53 ± 6 MPa
• Impact Strength: 19.2 ± 3.7 kJ/m²

Printing Tips

• Dry before use to ensure the best print quality and consistent finish.
  Drying conditions:
  • In a blast drying oven: 50 °C for 8 hours
  • In an AMS 2 Pro and AMS HT: 55 °C for 8 hours
  • On an X1 printer's heatbed: 60 °C to 70 °C for 12 hours
  Store in a dry environment after use. For more details, please refer to: Filament drying instructions.
• The refill filament needs to be used with a spool.
  For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide.

What's in the Box

• Filament with Basic Reusable Spool or Filament with Refill Spool
• Cardboard Package
• Desiccant