Bambu PLA Basic

Experience easy, reliable, and consistent 3D printing with Bambu PLA Basic. Ideal for everyday projects, this filament is optimized for both performance and affordability, making it the perfect choice for dependable, high-quality prints at a great value.

• Find the Perfect Color
  With a palette of up to 30 colors, Bambu PLA Basic lets you find the perfect shade to bring flair to your projects.
  The colors remain consistent across prints, ensuring a stunning and uniform finish every time.
• Your Worry-Free Start
  Bambu PLA Basic, the easiest-to-use filament, delivers smooth printing right from the start.
  No complicated setups or calibrations needed. Ideal for both hobbyists and professionals seeking reliable, hassle-free results.
• Built Stronger, Faster and to Last Longer
  With Bambu's exclusive fine-turned formulation based on 3D printing expertise and fine-turned settings, Bambu PLA Basic delivers stronger layer adhesion, enhanced impact resistance, and long-lasting durability compared to other standard PLA filaments on the market. Additionally, it reaches a print speed up to 258mm/s (0.4mm nozzle, 0.4mm line width, 0.2mm layer height), cutting your printing time without compromising quality.
• RFID for Intelligent Printing
  All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
  Load and print! No more tedious setting steps.

Recommended Printing Settings

• Drying Settings (Blast Drying Oven): 50 °C for 8 hours
• Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature: 190 - 230 °C
• Bed Temperature (with Glue): 35 - 45 °C
• Printing Speed: < 300 mm/s

Physical Properties

• Density: 1.24g/cm³
• Vicat Softening Temperature: 57 °C
• Heat Deflection Temperature: 54 °C
• Melting Temperature: 160 °C
• Melt Index: 23.2 ± 3.5 g/10 min

Mechanical Properties

• Tensile Strength: 35 ± 4 MPa
• Breaking Elongation Rate: 12.2 ± 1.8 %
• Bending Modulus: 2750 ± 160 MPa
• Bending Strength: 76 ± 5 MPa
• Impact Strength: 26.6 ± 2.8 kJ/m²

Printing Tips

• Dry before use to ensure the best print quality and consistent finish.
  Drying conditions:
  • In a blast drying oven: 50 °C for 8 hours
  • In an AMS 2 Pro and AMS HT: 55 °C for 8 hours
  • On an X1 printer's heatbed: 60 °C to 70 °C for 12 hours
  Store in a dry environment after use. For more details, please refer to: Filament drying instructions.
• The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide.

What's in the Box

• Filament with Basic Reusable Spool
• Cardboard Package
• Desiccant